The SKY CLIMBER is a good sized electric glider that is equally suitable for beginners or experienced pilots alike. At 2M span, she has quite a presence in the air and can be easily seen from a fair distance. The powerful brushless motor and ESC are pre-installed as are the 4 servos. All you have to do is intsall your receiver and battery and you are ready to go flying.

Made from tough EPO foam, the SKY CLIMBER can be docile as a trainer and aerobatic when required. Having both ailerons and rudder, the roll and turn response is immediate yet predictable. The wing section provides the right combination of high lift and good penetration into the wind. Under the right weather conditions, soaring is no trouble at all and long flights are easily possible. There is a lot of wing area and a low wing loading, so lift only has to be minimal for success. Even without lift, flights of 20 minutes plus are possible.

A great model for getting into gliders for the first time !!

Specifications:
Wingspan: 2010 mm
Overall length: 1210 mm
All-up weight: 950 g

RC functions:
- Aileron
- Rudder
- Elevator
- Throttle

Kit contents:
- Arcel fuselage with central reinforcing tube and landing skid glued in
- Injection-moulded fuselage nose with integral motor mount
- Ready-made ABS and magnetic latch
- Ready-made airfoil-section tail panels moulded in Arcel, with hinged control surfaces and pre-fitted horns
- Brushless Motor 2835/ 1050 kv
- Brushless Motor Controller 20 A
- Folding propeller and spinner
- Servos 9 g (4 pcs)
- Servo extension Y lead
- Comprehensive, illustrated operating instructions

To run the model, you will also need:
- RC system with 4 channel or more
- Transmitter battery
- LiPo Battery 11.1 V/ 2100-2200 mA
- Battery charger and charge leads