This is the radio controlled, glow powered, Almost-Ready-to-Fly Sonic High Wing sport trainer airplane kit from Phoenix Aircraft Models. For beginning modeler/fliers.

FEATURES:
- Construction: Built-up balsa and plywood
- Covering: Pre-applied PVC type heat shrink film
- Wings: Two-piece wood, must be joined before installation
- Radio Compartment: Plywood reinforced, easily accessible under wing
- Canopy: Silver painted section on fuselage to simulate canopy area, no canopy or pilot detail
- Landing gear: Pre-bent 3/16" (4mm) wire with 2" (51mm) foam rubbe main and nose gear wheels
- Single aileron servo: Yes, standard size and torque required
- Hardware: Hinges, wing bolts and all other required fastener included
- Motor Mount: Nylon, pre-mounted in fuselage

Specifications:
Wingspan: 1330 mm
Length: 1040 mm
All-up weight: 1830 g

RC functions:
- Aileron
- Rudder
- Elevator
- Throttle

Kit contents:
- Prebuilt and pre-covered wings fuselage and tail section tricycle landing gear with 2" (51mm) wheels
- Nylon engine mount, pre-bent pushrods, hardware package, fuel tank, hinges
- All hardware and fasteners and photo-illustrated instructions

To run the model, you will also need:
- RC system with 4 channel or more
- Glow plug engine 4 - 5.5 ccm
- STANDARDS servos (4 pcs)
- Recommended propeller for the chosen engine
- Glow plug for the chosen engine
- Glow starter with battery
- Electric STARTER (optional)
- Silicone fuel tube
- Fuel filter
- Fuel
- Fuel hand pump (optional)
- Receiver battery
- Servo extension leads
- Battery charger and charge leads