The flagship of the robbe Power Peak series of chargers.
A good-looking high-performance computer charging / discharging station with battery management for all current battery types. With integral Equalizer and BID. Extreme High Power allows charge current up to 20A.

The clear lines and elegant appearance of this charger are made possible by the new Cap-Touch system: no-contact sensors for the switches and the 3-D hotkey permit a smooth, sealed surface devoid of projecting controls.

The large, bright, backlit 95 x 65 mm graphic LCD monitor provides a clearly arranged display of charge parameters or battery data; the screen is also mounted below the sealed operating surface. The screen offers 192 x 128 pixels and can display twelve separate lines, allowing the use of a clearly legible display font. The screen shows the essential parameters of the current procedure in numerical and graphic form, giving the user the opportunity to observe and check the current process at all times.

The set-up menus are easily and conveniently navigated using the CAP-Touch system, and the menu system can be set to various languages (German, English etc.).

The maximum charge power is enormous at 315 Watts, equating to a maximum charge current of no less than 20 A, corresponding to a charge rate of about 15 A with a 5S LiPo battery. High charge currents are particularly important in order to obtain short charge times. The new RO-POWER 30C LiPo batteries can already be charged at 2C. LiFe batteries can even be charged at 5C, so this high charge power is important, as it significantly reduces effective charge times.
The maximum discharge power is 160 Watts, i.e. a maximum of 40 Amps with a 1S LiPo cell.

An important feature of the E1 is the trend-setting Battery Identification System (BID) The many different battery types will continue to increase, whereby each pack type will require its own individual charge process. The revolutionary BID system offers a clever solution to this problem and makes the operation extremely secure and easy.

In addition to the Charge, Discharge and Cycle modes the charger also provides different charge processes to suit the various battery types.

For Lithium and Lead-Acid batteries the charger operates using the CC-CV charge and cut-off process.

In the interests of safety it is possible to monitor and display the temperature of a battery during a process; it is even possible to terminate the charge automatically at a particular pre-set temperature; the appropriate sensor is supplied as standard.
Future-proof: Flash memory technology is the key. Software expansions can be loaded in the form of upgrades. Alternatively the charger software can be updated to cope with new battery technologies.

Rapid developments in Lithium battery technology mean that new battery types are constantly appearing, all with different charge and cut-off voltages (Lithium-Ferrum, Lithium-Phosphor, etc.). The Eternity charger is already prepared for these changes, as it features a special menu with a variable set-up facility for the Lithium battery voltage. This means that it can be adjusted within broad limits to suit new Lithium battery types and their cut-off voltages.

The charger features a USB interface for connection to a PC. The excellent free PC software "Logview" is now well known, and can be used to process the data from the Eternity charger for recording, storing, comparing and printing. The charger also features its own internal memory, so that data can still be recorded if no PC is connected to the unit, allowing the data to be read out and stored at any subsequent time.

The charger features two independent charge outputs, intended for drive and flight batteries (OUT 1), and transmitter / receiver batteries and small LiPo packs (OUT 2).

Quiet, temperature-controlled cooling fan.

The charger can also be used with the 230 V mains supply if connected to the included Switching Power Supply, making it into a universal 230V AC and 12V DC battery charger.