A very attractive glider of proven Arcel construction, with good looks and performance. Accurately moulded Arcel components mean that the ARCUS can be assembled into an elegant glider in the absolute minimum of time.

The ARCUS is a fine looking glider which offers a convincing performance with superb dynamic characteristics. The model is fitted with aileron, rudder and elevator controls, and is capable of simple aerobatics.

The real strength of the ARCUS is its excellent thermal and slope flying characteristics. At the slope the model can be ballasted if necessary to suit the strength of the wind.

Installing the "Arcus Motor Set" converts the ARCUS into a motor-glider. The set contains a brushless motor and the latest technology Li-Po cells, ensuring a powerful climb performance.

The proven ARCUS glider is now also available in ARF version. This new variant is intended primarily for the model pilot who wishes to fit out the glider with a power system from the outset, and for whom building time is at a premium.

The model is identical to the kit-version of the Arcus as featured in the main catalogue, but offer higher levels of pre-fabrication and include different fittings. The glider is supplied virtually completely assembled. The motor, speed controller and servos are already installed, and the control surfaces are prepared for connection.

Specifications:                                                          Instructions 
Wingspan: 1800 mm
Overall length: 1120 mm
Total surface area: 32 sq.dm
Wing loading: 22 g/sq.dm
All-up weight: 700 g

RC functions:
- Rudder
- Elevator
- Ailerons
- Throttle

Kit contents:
- Arcel fuselage with servos and linkages installed
- Factory-fitted brushless electric motor, with pre-wired electronic speed controller; folding propeller and spinner fitted
- Ready-made Arcel canopy with magnetic latch
- Arcel wing panels with wing joiner system installed, two aileron servos fitted and ailerons pre-hinged, ready for use
- High-quality carbon fibre wing joiner tube
- Ready-made airfoil-section tail panels moulded in Arcel, with hinged control surfaces and pre-fitted horns
- Decals
- Comprehensive, illustrated operating instructions

To run the model, you will also need:
- RC system with 4 channel or more
- Transmitter battery
- LiPo Battery 11.1 V/ 1300 mA
- Battery charger with charge leads

Replacement parts:
- Stabiliser Set Arcus - item 31170003
- Wings Set Arcus - item 31170004
- Fuselage Arcus - item 31170005
- Decal Set Arcus - item 31170006