A semi-scale reproduction of the world famous Discus.

This model brings the characteristics of the original to the fore-front. The high quality GRP fuselage is finished in white gel-coat and pre-drilled for all the wing dowels etc. The wing joiner is made from CNC machined aluminium and is pre-adjusted, alleviating the need for a long drawn out alignment process.

The generous dimensions of the canopy cut out allow for easy fitting of the radio and a scale cockpit.

Specifications:
Wingspan: 2650 mm
Overall length: 1153 mm
Wing area: 54.8 sq.dm
Weight: 1100 - 1200 g

RC functions:
- Aileron
- Rudder
- Elevator
- Throttle

Kit contents:
- White coloured pre-painted GRP fuselage
- Pre covered balsa skinned rib/spar wings
- Blue coloured vacuum formed canopy
- Pre covered balsa skinned elevator
- All needed RC accessories and fittings
- Decal sheet
- Detailed instructions

To run the model, you will also need:
- RC system with 4 channel or more
- Transmitter battery
- NANO servos (3 pcs)
- MICRO servos (1 pcs)
- Brushless outrunner motor 3536/ 06
- Motor accessory set with propeller adapter
- Spinner with folding propeller 10 x 6
- Brushless motor controller
- Connector set between controller and batery
- LiPo battery 11.1 V/ 2500 mA
- Servo extension lead
- Battery charger with charge leads
Tech note: in the tail there is a 20x40 mm hole for a standard rudder servo; if you want to use a micro servo, then you will need to make two small blocks out of plywood and glue them into place.