A semi-scale reproduction of the world famous Discus.
This model brings the characteristics of the original to the fore-front. The high quality GRP fuselage is finished in white gel-coat and pre-drilled for all the wing dowels etc. The wing joiner is made from CNC machined aluminium and is pre-adjusted, alleviating the need for a long drawn out alignment process.
The generous dimensions of the canopy cut out allow for easy fitting of the radio and a scale cockpit.
Specifications:
Wingspan: 2650 mm
Overall length: 1153 mm
Wing area: 54.8 sq.dm
Wing section: HX 83-NACA, 3 Modify
Weight: 1100 1200 g
RC functions:
- Aileron
- Rudder
- Elevator
Kit contents:
- White coloured pre-painted GRP fuselage
- Pre covered balsa skinned rib/spar wings
- Blue coloured vacuum formed canopy
- Pre covered balsa skinned elevator
- All needed RC accessories and fittings
- Decal sheet
- Deatlied Instructions
To run the model, you will also need:
- RC system with 4 channel or more
- Transmitter battery
- NANO servos (3 pcs)
- MICRO servos (1 pcs)
- Receiver battery 4.8-6.0 V/ 2000-2500 mA- Servo extension lead
- Battery charger with charge leads
Tech note: in the tail there is a 20x40 mm hole for a standard rudder servo; if you want to use a micro servo, then you will need to make two small blocks out of plywood and glue them into place.
